Trying to unblock your kitchen sink drain, shower drain or other drain in the house? In this post, you will learn some DIY drain unblocking methods that you can attempt before calling out a professional blocked drain repair company in Kent.
How To Unblock Your Clogged Up Drain Naturally
Pour Hot Water
Boil a generous amount of water until you start seeing bubbles. Now pour hot water in blocked drainage pipe. Don’t use excessively hot water if your drainage pipe is made of plastic material; you can use warm water though. Repeat the procedure up to 3-4 times if needed.
After a while, you can run the tap water to check if the blockage is cleared. If your bathtub is draining slower these days, you can fill the tub fully with hot water and then open its drain. The law of gravity and sudden water pressure in the drainage pipe will break the clog into pieces making your drains at optimal speed like earlier. However, if the clog is too stubborn to remove using this technique, you need to hire a professional blocked drain company in Kent before the drainage problem get worse.
Use The Household Draining Cleaning Tools
Drain cleaning tools like plunger and drain snake should be always kept handy in your home. If you don’t have one of these drain unblocking tools, you can shop it from a local hardware store or a supermarket at a cheap price. There are many videos and tutorials available over the internet that teach you how to use these tools the correct way.
Make sure you hold the plunger firmly and form a tight seal between the round-shaped rubber base of the plunger and the drain cover. Next, push the tool in up and down manner to build pressure over the blockage inside the pipe and break it into pieces.
A drain snake is another useful tool for drain unblocking. It looks similar to a rope. But here it’s a metal rope. Enter the rope’s correct side into the drainage pipe and keep pushing the rope until it hits the clog. Twist the metal rope in a manner that it stuck inside the clog. And then pull out the snake carefully and slowly. Once the blockage is removed, run some tap water for a while to clear the remaining pieces of the clog that may have left inside the pipe.
You can also use a metal hanger to snag the blockage and clear your drainage pipe. No matter which tool you use for clearing your drain, don’t forget to use rubber gloves during the procedure to ensure safety and hygiene. It is also recommended to keep bucket and an old cloth nearby in case you need them. Don’t play with the tools if you don’t know how to use them the right way, else you will end up damaging your pipe or agitating the drainage problem.
Try Homemade Drain Cleaner
Some ingredients that are easily available in your kitchen like vinegar and baking soda can be used with hot water to clear blockage and clean your drains. If you don’t have vinegar, lemon juice can be its substitute. Pour a half cup of baking soda and a half cup of vinegar down the blocked drain followed by 1 full cup of hot water. Wait for 10-15 minutes and add some more water to check if the blockage is cleared.
If all these drain unblocking methods fail to result, search for a blocked drain repair Kent company like 3FlowDrainage online.