Turn Your Simple Toilet into a Bidet Toilet in 5 Easy Steps

0
144

Did you know there’s a simple way to add bidet functionality to your existing toilet? Transforming your standard toilet into a self-cleaning bidet can be an easy DIY project. Below, we will discuss turning your simple toilet into a bidet toilet step by step.

What Tools Do You Need?

Tools are the backbone of any project, whether it’s fixing your toilet or building a house. You can do a lot without them, but they’re invaluable when it comes to making sure that everything works right. These are the tools to convert your toilet into a bidet.

1.Bidet Kit

The first thing you’ll need is a  bidet converter kit. These kits contain everything you need to convert your toilet into a bidet toilet. They’re relatively inexpensive and easy to install, even for those who don’t consider themselves handy.

2.Screwdriver

You’ll also need a screwdriver to tighten the screws that come with your kit. These screws will secure the conversion valve assembly and make sure it stays in place when you’re done installing it.

3.Adjustable Wrench

If you don’t already have one, an adjustable wrench will help tighten or loosen nuts and bolts during installation.

How To Convert Your Toilet Into a Bidet

A bidet toilet is exactly what it sounds like: a toilet that sprays water onto your bottom when you use it. It’s not just for fancy bathrooms. It’s also perfect for cleaning up when you are done; here’s how to install a bidet.

1.Turn Off the Water

Turning off the water before you begin any work on your toilet is important. To do this, turn off the valve that controls the water supply under or behind your toilet. It will stop any leaks and prevent water from leaking onto your floor while working on your bidet toilet conversion.

2.Unscrew the Toilet Seat

To remove the seat from your toilet, you need to unscrew it from its base. It will let you get access to it so you can install your bidet kit underneath it. There are usually two screws holding onto each side of the seat, but some toilets have more screws than others (four or five). 

If yours has fewer than four screws, they’ll probably be hidden under caps that look like little rubber plugs. Just pop those off with a flathead screwdriver and extract their contents before proceeding with the installation. Unscrew all these screws until they’re completely removed from their holes; set them aside in a safe place where they won’t get lost or damaged while working on other parts of this project.

3.Attach T-Valve

Attach the T-Valve to the Tank Valve. It is the valve that controls whether or not water flows into your toilet tank. If you have a toilet with a metal tank, you can attach this directly to your tank valve. If not, you will need to purchase an adapter kit to attach a T-Valve to a plastic valve.

4.Attach the Bidet Seat to the Bolts

Once you have attached your T-valve, you can attach your bidet seat to the bolts preinstalled in your toilet. Again, the installation should be pretty straightforward to do.

5.Connect the Water Supply Line to the Angle Valve

To connect your water supply line, simply thread it through one end of the angle valve (the side with two holes) and then screw on the nut until it’s tight. Be sure not to over-tighten. Your angle valve should be fitted snugly against your existing supply line so there are no gaps between them. Now all you have to do is turn on your faucet and test out your new bidet toilet seat by pressing its power button if applicable.

The Bottom Line

Bidet toilets are big in Japan and are becoming popular in Western countries. The water jet from a bidet toilet is helpful for keeping it clean. The popularity of bidet toilets is increasing, but many think installing one is too complicated or expensive. Thankfully, it’s not that difficult to turn your simple toilet into a bathroom talisman with a bidet attachment kit. You’ll be able to enjoy the same benefits of bidet toilet seats right away.

LEAVE A REPLY

Please enter your comment!
Please enter your name here