Removing Water and drying your home after water damage

Removing Water after water damage

Water Damage has been a constant problem. They can happen anytime and anywhere. One cannot imagine how much a person has to suffer during removing water after water damage.

The water can damage everything which is there is its way. It is so overwhelming to see the destruction the water has caused to your things which have sentimental value. 

The only way to solve this situation is by tackling this situation. But the question is how? How to tackle this situation? What is the next step? 

This blog is the ultimate guide for it. The following things should be kept in mind while removing the water and drying it. 

1) Removing the water

You must remove the water from the premises as standing water can cause massive damage to the property. Be quick in removing the water, as this will reduce your damage.

There are three ways to remove the water from the premises. The first method is by employing a shop-vac, the second method is by water pump which can draw the water electronically, and the last way is by using a bucket or a container.

Before using a water pump or shop-vac, read the instruction manual carefully. Identify the method for employing the vacuum and pump first and then use it. In the case of shop-vac, you need to remove the filter before you start water removal.  

2) Check the drainage area

Standing water may take a lot of time to vaporize. Your lawn or porch gets saturated with water. Thus the process of absorption of this water by them becomes very slow and may have minimal effect. It would help if you cleaned the drain in and around your home so that water can drain out through them. 

Create more channel towards the sewage drain to empty your porch and water around your area. You can even you a tank to store the water. 

In case of flood, the water contains leaves, dirt, sewage, mud, leaves, branches any many more substances, and they clog the drains. Therefore, you must remove the debris so that water can drain smoothly and quickly. 

3) Dry out the place completely

Once all the standing water has been drained out, the next step is to dry the place completely. Water increases the dampness and wetness in the area. It is essential to remove this moisture. Otherwise, mold growth can take place. If you have a ventilation system, then switch it on as it will fasten up the process.

Open up all the windows and fans. Let the fresh air and sunlight enter the premises. You can also install dehumidifiers. They remove excess moisture and humidity from the air. You can even call a water removal company to remove water using the advanced method to dry the place.     

4) Detect for water and mud at trapped places

Many times, there is mud and water trapped at the places, and it remains untraceable. You must remove these traces of water and soil. You must remove the drywall, baseboards, flooring, carpeting, furniture, cabinets, appliances etc. You should remove the mud and water beneath it. 

Water removal company have specialized equipment which can track these water and mud. However, the mold can grow in such an area, and thus you must take remedial steps. 

5) Restore and move back

After removing the water and drying the place, you need to restore its original condition. First, you need to remove to change the carpeting, drywall, furnishing. Next, you need to identify which old things are in good condition and can be employed and replace which are damaged. 

 You can hire a water restoration company as they are equipped in this area and can handle the majority of restoration from you, starting from carpeting to your insurance. It will ease out the process for you. 



Please enter your comment!
Please enter your name here