Easy steps to safely jumpstart a dead car battery

jumpstart a dead car battery

This might not be an entirely new thing for you, right? You are late for the office. You rushed into your car and turned the key, but alas, your car betrays you when you need it the most, and you are left stranded in your garage. We all know what happened there; it is a dead battery. 

Now your only choice is to call an automobile service company and pay them good bucks for fixing a small problem. Well, there is a much better alternative. Equipped with the right knowledge and the right tools, you can, by yourself, easily fix this issue and get your car rolling in a flash.

Getting your jumper cables

The entire jumpstarting business requires very few tools and mostly revolves around a jump starting cable and another car. Yes, you have to have a functioning car from somewhere to jumpstart your own car. You can go over to your neighbor and ask him for his car or stop any random car passing by, and ask the owner to be a good samaritan, but you need a functioning car. 

The other thing you absolutely need is jumper cables. They come quite cheap, so you do not need to worry about that. And they can even be stored easily. A gauge six cable is the standard size. If you are wondering where to find a good variety of jump starter for diesel car at an affordable rate, check out BestForDriver.

Safety Measures

Safety Measures

Now that you have got everything that you need for jumpstarting your car, you are good to go. But before proceeding, you should consider taking the following safety measures so that no harm comes either to your family or to your car. 

  • Keep children at a safe distance.
  • Don’t forget to put on the brakes. 
  • Read the car manual for special instruction in case they are needed for your car.
  • Properly attach the jumper cables.
  • Use protective glasses.

Steps to kickstart your car

Now that we have got most of the difficult things out of the way, it is time to get your car running again.

  • Park the cars nearby, but they shouldn’t touch each other.
  • Connect the jumper cables. The reds go to the positive terminal and blues to the negative.
  • Start the working car and wait for a few seconds.
  • Try to start your car.
  • If it does not start, try revving the engine.
  • Remove the cables.
  • Keep the faulty car running for some time.

And now your car should be ready to hit the road in a few minutes.



Please enter your comment!
Please enter your name here