Fact check 1: Painting is one practical, inexpensive way to improve the look of your home without breaking a sweat – ermm; that’s not entirely true. You’ll sweat a bit.
Fact check 2: Most homeowners dread painting. Well, maybe because of the mess they could make. Or perhaps, they can’t spare some time during the weekends to do it.
But hey, if you’re reading this, it means two things, that: One, you don’t mind sweating it out a bit to rejig your room. Two, you have a bit of time to spare and that you are finally ready to splash some color.
However, here are six things you should know before painting a room, and while at it, you may also want to check out these Top10Goods Reviews for the best painting gadgets.
Start with the end in mind
It’s pretty obvious, right? But the thing is, it’s worth repeating. You don’t want to dive headlong into a paint job without first identifying how you want the room to look at the end of the painting.
You can start by searching through Pinterest for room paint inspirations and then work from there until you have something that feels intimately like you.
Get your paint tools ready
Once, you have an idea of how you’d want your room to look; the next thing is to ready all the tools you’d be needing.
You don’t want to start painting only to realize you need a sand brush to scrap and smoothen the wall. Though, every paint job might require different tools but, here are some to cross off your list:
- Paint roller
- Climbing ladder or an extension pole
- Drop cloths to catch drips
- Paint tray
- Sand brush
- Masking tape
- Putty knife
Determine how much paint you need
You don’t want to run out of paint right in the middle of a paint job. You also don’t want to have a lot of leftover paints on your hands at the end of the project, try looking at different painters stamford ct to take care of the job for you as an alternative.
That’s why calculating beforehand the actual quantity of paint you needed the project is a smart move. Thankfully, there are a couple of ways to determine how much paint you will need.
First, you will need to know the total area of your room; this way, you can figure out the exact amount you need.
Secondly, also, consider how many coats of paint you intend to apply. Are you going to use a primer or paint without one?
With a primer, applying only one layer of paint is usually enough. However, if you’re not going to, first apply a primer; then you will need to use two layers of paint. Mind you; all these will affect how much paint you will need.
Prep the wall and the room
Sure, this is not the fun part of the whole process. And if you’re anything like most people, they’d rather skip this step.
But, here’s the thing, you run the risk of doing a not-so-smooth, dirt-bleeding-out paint job if you don’t prep the wall before painting.
Use the putty knife, sandpaper to scrape and smoothen out rough surfaces and to fill up dents, cracks, and nail holes.
Clean the wall to remove stains and grease from the wall before sticking the painter’s tape, if not, it might probably not hold.
Also, you may want to cover any piece of furniture in the room, including using the drop cloths to cover the floor to avoid getting paint drops on them.
To save on paint use primer
Primer is often a good idea, especially when painting over darker coats; plus, if you have had to fill in holes and cracks, it helps conceal the colors, cracks, and holes from bleeding over.
Primer also helps improve the adhesion of the top paint on the wall. And since you don’t need a second coat of paint when using primer, it saves you paint.
Determine a painting strategy
You will need to determine how you’d apply the paints. Use a top-down approach where you work your way from the top of the wall down.
The W technique offers more efficiency. To use the W-technique, you’ll have to roll the brush in a W shape from the top, down and up again; then fill in the spaces without lifting the brush.