The size of a watch brand is one of the factors everyone needs to consider when choosing the best watch to buy. The wrist sizes vary for different people. Therefore, you must select a band that has a size that perfectly fits you. Most people tend to cut off the bands of their malachite watch to adjust them to fit the wrist perfectly. However, this is not a good practice suitable for everyone. You can use better ways to help you choose a watch that has a better Watch Band Sizes for you.
Watch Band Sizes and How to Measure?
The Watch Band Sizes of a watch brand is one of the factors everyone needs to consider when choosing the best watch to buy. The wrist sizes vary for different people. Therefore, you must select a band that has a size that perfectly fits you. Most people tend to cut off the bands of their watches to adjust them to fit.
What factors affect the brand size of a watch?
To select the most suitable band size that will best fit your wrist, it is essential to consider factors that affect different watches’ band sizes. These factors include the diameter of the face of the watch and the length of your watch band.
Therefore, when buying a watch, it will be necessary to take measurements of the two parts of the watch and compare them with your wrist size. You may be wondering how you can measure the two parts of the watch when trying to select your perfect wrist size band. If so, don’t worry anymore; this article describes you need to measure these parts flawlessly.
How to Measure the Length of a watch band
The size of your wrist is a crucial factor you must consider when determining the length of the watchband. Therefore, keeping the wrist size in mind, there are two types of band sizes you will get in the market today.
They include the extended or longer band size and the shorter band size. The more extended band sizes are always designed with long ropes with holes and wire in many watches. On the other hand, shorter band-sized watches are designed with buckle codes.
In most Lola Rose watches, the length of their band sizes is usually represented as 150/50. This shows that the long band size is 150mm, whereas the shorter band size is 50mm. Consequently, to measure your wrist, you will have to use a measuring tape. Alternatively, you can use a string or rope and wrap it around your wrist, then transfer it to the tape measure.
You will perfectly get your accurate wrist size when ideally, your measurement carefully. However, when you have problems wrapping the string around your wrist or taking a measurement using a tape measure, you should seek assistance from a friend or colleague to be more accurate.
How to measure the width of a watch band
Now that you have an idea of how you can measure the length of a watchband, it is also essential to learn how to measure the width. The width of a watch band size can either be slim or wide.
The watches with slim band sizes look smaller than those with wider band sizes. You can measure the width of the watch using either a ruler or a caliper. The measurement of the width of a watch band is always presented as 30/20. This shows that the width of the pin of the watch measures 30mm, whereas the width of the buckle is 20mm.
The bandwidth ranges from 18mm to 24mm for most men’s watches. These watches have a face diameter ranging from 36mm to 48mm. In addition, most watch glasses are designed with their bandwidth being half the glass size for a perfect fit.
On the other hand, to suit your wrist size effectively, you will have to consider the face diameter of the watch. There are different standards of the face diameters you can look at to find which category fits you. These wrist standards include;
Wrist for small female: 23mm to 25mm
Average wrist for females: 26mm to 29mm
Midsize wrist: 34mm to 36mm
Wrist for small male: 37mm to 39mm
Wrist for medium male: 40mm to 42mm
Wrist for large male: over 42mm
How to measure the Watch Band Sizes using a ruler
Knowing how to measure the watch band size using a rule is essential when figuring out the best watch band size that will fit you. For this reason, the step-by-step procedure for measurement below is prepared to help you easily measure the watch band size with your ruler. What you need to have are a ruler and a tape measure, and then you begin your measurement as follows:
- Step one: First, determine a suitable measurement location. In addition, you should also determine the position you want to measure, which in this case is the watch part that is directly in contact with the wire of the watch.
- Step two: Using the ruler, measure the distance between the wire and its contact point with the watch. Record your measurement in mm (millimeters), the most commonly used unit for measuring the watchband sizes.
- Step Three: Using the ruler, measure the watch bandwidth adjacent to its keychain. In most cases, the keychain measurement will be about 2mm smaller than the part in contact with your watch.
- Step four: The next measurement you will need to take is the watch band thickness. This will help you replace the watch band with another one that has moderate thickness if you find the band too thick or thin.
- Step five: It is also essential for you to measure the size of your wrist before replacing the band, especially if you have a unique wrist size (when your wrist size is too small or big).
You can also measure the keychain size as it sometimes differs in some watches. In addition, when taking the measurements, ensure you are more careful in reading the values to improve your accuracy. This will also make your measurement of great help for you in determining your best watch band size.
Wearing a watch with a band size makes you feel more comfortable with your watch. However, choosing a watch with a band size that perfectly fits you may be challenging, especially if you don’t know how to measure the band size. For this reason, you need to learn how to measure the size of the watchband and your wrist size.