If your old recliner is looking a little worse for wear, it might be time to give it a new lease of life by reupholstering it. This can be a daunting task if you’ve never done it before, but don’t worry – we’re here to help! In this blog post, we will walk you through the steps involved in reupholstering a recliner. So whether you’re feeling brave enough to do it yourself or you’re thinking of hiring a professional, read on for some handy tips!
Table of Contents
DIY Instruction
The first step in reupholstering a recliner is to remove the old upholstery. This can be done by unscrewing the screws that hold it in place and then pulling it off. Be careful not to damage the frame of the chair while you’re doing this!
Once the old upholstery has been removed, it’s time to start on the new one. The best way to do this is to measure how much fabric you need and then cut it out accordingly. Make sure that you leave enough excess fabric so that you can fold it over and staple it in place later on.
Next, position the fabric over the chair and staple it into place. Start with one corner and work your way around, making sure that it’s nice and tight. Don’t forget to do the back of the chair too!
Once the fabric is in place, it’s time to start attaching the padding. This can be a bit tricky, so make sure you take your time and follow the instructions carefully. The best way to do this is to cut out a piece of padding that’s slightly bigger than the area you’re covering and then attach it with some staples or glue.
Finally, it’s time to put on the new cover. Again, make sure you measure how much fabric you need and then cut it out accordingly. Start by stapling one corner in place and then work your way around, making sure that everything is nice and snug. Don’t forget to do the back of the chair!
Fabrics for reupholstering
What are the top fabrics to reupholster your best leather recliner? There are a few different fabrics that you can use to reupholster your recliner, but some of the best options include leather, vinyl, and microfiber.
Each of these materials has its own unique benefits, so it’s important to choose the one that best suits your needs.
Leather is durable and easy to clean, while vinyl is more budget-friendly. Microfiber is a great option if you’re looking for something that’s both comfortable and easy to care for. Whichever material you choose, make sure that it’s able to withstand the wear and tear of everyday use!
How much fabric do I need to reupholster a recliner?
To reupholster a recliner, you will need approximately 6-8 yards of fabric. This will allow you to have enough excess fabric to staple in place, as well as enough fabric to cover the padding. If you’re planning on hiring a professional, they will be able to advise you on how much fabric you need.
Can you reupholster over existing fabric?
Yes, you can reupholster over existing fabric, but it’s important to make sure that the fabric is in good condition before you do so.
If the old fabric is lighter than your new fabric, you can upholster it right over it.
If the fabric is ripped or torn, it will need to be replaced before you start reupholstering.
How long does it take to reupholster a recliner?
The amount of time it takes to reupholster a recliner will vary depending on your skill level and the condition of the chair.
If you’re planning on doing it yourself, allow for at least a day or two to complete the project.
If you’re hiring a professional, they should be able to do it in a day or two.
If the chair is in good condition, it will take less time to reupholster than if it’s in poor condition.
In general, expect to spend at least a few hours reupholstering a recliner, whether you do it yourself or hire someone to do it for you.
Is it cheaper to reupholster or buy new furniture?
This will depend on a number of factors, such as the cost of the fabric, the condition of the furniture, and whether you hire someone to do it for you or not.
In general, it’s usually cheaper to reupholster existing furniture than it is to buy new furniture.
However, if the furniture is in poor condition or you’re planning on hiring someone to do it for you, it might be more expensive to reupholster than to buy new.
Only you can decide whether it’s cheaper to reupholster or buy new, but we hope that this blog post has given you some useful information that will help you make your decision!
How do you make an old recliner look good?
There are a few things you can do to make an old recliner look good. First, make sure that the fabric is in good condition and free of any rips or tears. Second, consider reupholstering it with new fabric. This will give it a fresh, new look. Finally, add some new padding to make it more comfortable. These simple steps will help to make your old recliner look good as new!
Conclusion
And that’s it – your recliner is now ready for use! We hope you found this blog post helpful. If you have any questions, feel free to ask us in the comments section below. Thanks for reading!
