Block paving, when left neglected, can make way for an unsightly garden. This makes it necessary to keep up the looks of your paving in a way so that it feels as if it is just installed. Fortunately, this issue can be dealt with a few simple steps and a good sealant from Picseal supplier in Essex.
Even if you see there are no weeds in between the patio or paving slabs, preventing their growth is better. That’s because seeds might embed themselves into deeper gaps. They must be removed at the earliest phases so that you don’t find your nicely laid paving ruined by weeds. Here are some effective ways to get rid of weeds:
- Selecting the right sealant
The first step in getting your pristine driveway rid of weeds is to choose the right sealant according to the particular kind of paving – clay or concrete. You can find various kinds of sealants from Picseal supplier in Essex, and thus you should choose the one that’s made for your pavement to rule out chances of recurrence.
Some users opine that all-purpose sealants are ineffective as they have a one-size-fits-all approach rather than targeting the growth of weed. The effect you want on your pavement such as low sheen, damp look, matt or neutral should also be factored in when choosing sealants from Picseal supplier in Essex.
- Prepping the pavement
Before you start applying the sealant, make sure that the area is properly clean and completely dry. If it’s feasible, you may leave a few days between cleaning and sealing. With this, you can make sure that the cleaning process has not given way to any crystalline deposits on the pavement blocks. Make sure that you are undertaking the cleaning and sealing process when there is no precipitation. Dry weather prevents any scope of moisture build-up in between the blocks.
- Applying the sealant
Once the surface is prepared, you can move forward with applying the sealant on the surface. It should saturate the entire area without creating puddles of the sealant. Start the process by pouring out the sealant and then rolling it out with a pile roller. Alternatively, you may go for a sealant that can be applied through spraying.
Once it becomes dry, which may take up to three hours, you have to apply another coat. The sealant needs to be concentrated on the joints. For specific instructions, you must refer to the manual to determine the quantity required for each application. The higher the number of coats, the glossier will be the finish.
It’s suggested that you keep away traffic from the pavement or driveway for a day after applying the sealant. Even though effective sealing is a proven way to prevent weeds from growing through pavement, many make the mistake of assuming that the job is complete once the application is done. Ongoing maintenance is a critical part of keeping your driveway and pavement fine throughout the year.