Washer Won’t Drain? Not Getting Hot? 4 Common Washing Machine Problems and Solutions

0
95
Washer Won't Drain? Not Getting Hot? 4 Common Washing Machine Problems and Solutions

Did you know that there are 660 million loads of laundry washed every week in the United States? That equals out to about 35 billion loads of laundry in the average year.

Keeping up with the massive pile of laundry can be challenging, especially if your washing machine isn’t properly functioning. If you found that your washing machine just isn’t working the way it used to, solving the most common washing machine problems can help you get back on track with your family’s laundry.

Washer won’t drain? Load stopping in mid-cycle? Is your washing machine making strange sounds?

Whatever the problem may be, we’ve created a complete guide of the most common washing machine problems and solutions. Keep reading to learn more!

Washer Won’t Turn on

If you found that the washing machine doesn’t turn on when you press the on button, a simple fix may be the easiest solution to your problem. The first place that you should look is at the source of power for the washing machine repair service.

Checking the Power

Before you purchase a new washing machine, you should make sure that it’s getting power. You can use a multimeter to check the outlet voltage to ensure that the washing machine is getting enough electricity to power it.

If there isn’t any electricity moving into the washing machine, you should inspect your electric panel and see if any circuit breakers have been tripped because of an overdraw power.

If you’ve discovered that the circuit breaker hasn’t tripped, that may be a problem with the outlet that’s supplying the power to the washing machine. Try turning your household electrical panel off and calling an electrician to replace the outlet.

Motor

As a safety precaution, a washer won’t turn on if the motor has overheated. If the machine doesn’t turn back on after shutting down in the middle of a cycle, give it a little bit of time to cool down before trying to start it again.

Washer Won’t Drain

When your washer won’t drain properly, the cause of the problem could be as simple as a clogged drain hose to a pump that’s malfunctioning. If you don’t take care of a drainage problem in time, your machine may leak water or cause a flood in your washroom.

Drain Hose

If a drain hose is clogged, it could be why your washer is turning off the water. Before starting up another load of laundry, make sure that your washing machine is empty, and remove the drain hose. You should visually inspect the drain hose for any clogs.

If you find that there is a clog in the drain hose, you can flush out the blockages. Observe the drain hose for kinks.

Keep in mind that the drain hose should be above the level of water in the drain tub. Also, make sure that it’s a minimum of 1 1/4 inch in diameter, sealed to the standpipe, and less than 96 inches in height.

You may also experience issues with your drain hose if your home is having problems draining water. Consider contacting a local plumber for repair tips to get your drain hose to work properly again.

It Won’t Spin

There are several contributing factors that can play a part in why you’re washing machine won’t spin properly. Thankfully, some of the reasons why your washer won’t spin can be as simple as how the washer is running.

Loads of Laundry Are Too Large

If you put in too large of a load, it can cause the washing machine to become unbalanced. When your washing machine is overloaded, it won’t be able to spin. Even if the load isn’t too large, you can throw your wash machine off the balance if you don’t evenly distribute your clothes within the wash basket.

All you’ll need to do to fix this problem is to re-adjust the load of your clothes. You can either remove all the clothes from your load or move them around inside of your washing machine so that the load is evenly distributed.

Using Too Much Detergent

If your home has hard water and you’re actively using a water softener, your washer may be leaking because your load of laundry is getting too sudsy. By reducing the amount of detergent you use when washing clothes, you can prevent your washer from leaking water when it gets too sudsy.

Remember, using hot, soft water takes less attention to clean your clothes than using cold, hard water does.

It Doesn’t Dispense Detergent

If your washing machine has an automatic dispenser that isn’t dispensing your detergent, there may be several contributing factors that could be causing this problem.

The first reason why your washing machine may not be dispensing detergent is that the dispenser needs to be cleaned. Clean the dispenser for your washing machine at least once a month with a cup of warmed distilled white vinegar.

You can pour the white vinegar into the dispenser and run your washing machine through a regular cycle. This will clear out any clogs and residue inside of your dispenser.

On the other hand, your dispenser may not be working because you’re using the wrong type of product. For example, if you have a washing machine that was built for liquid detergent, using a powdered detergent can cause your dispenser to clog.

Be sure to check with the owner’s manual of your washing machine before using any type of detergent.

Understanding These Common Washing Machine Problems

There are many reasons why your washer won’t drain, won’t spin, or stops midcycle. By keeping these common washing machine problems and solutions in line, you’ll hopefully be able to have your washing machine working as good as new.

Are you interested in learning more about how to properly care for your washing machine? Check out our blog for more info.

LEAVE A REPLY

Please enter your comment!
Please enter your name here