5 woodworking tips to boost your work efficiency

5 woodworking tips to boost your work efficiency

Crafting a wooden piece by your own without any expert help may seem difficult. But in today’s world, we’ve got so many new ideas and technology with the help of which we could handle this task quite easily. After all, we live in a generation of not hard but smart work. With high-quality sandpapers, excellent work results can be obtained. Nowadays reusable sand blocks can be made at home only for efficient work. Let’s see what else can be done in order to increase the efficiency in your woodworking workspace.

Always have an idea of the wood’s moisture content:

Knowing your Wood’s moisture content is the most important point to keep in mind while crafting a wooden piece. If the moisture is too less, the finished product will either swell or crack. If the moisture content is too high, it’ll either shrink or wrap. It’s too difficult to figure out the exact moisture content of the wood piece. For this, you can make use of a moisture meter. Wagner meter is one of the highly accurate meters which isused by both beginners and experts. This way, you’ll have an idea of the moisture contained by your wooden piece before you use it in the workshop.

Avoid any excess glue stains:

Everyone wants to see a beautiful finished product and if there are dirty glue stains in your woodwork all your efforts will be judged. To avoid excess glue coming out of the joints, you may first clamp the two pieces to be joint together without glue. Next thing you need to do is to apply masking tape over the joints. Now, separate the pieces and apply the glue. Now, at last, again clamp them together. What this will do is, all the extra glue will ooze onto the tape. Don’t forget to remove the tape before the glue dries.

Keep your workshop clean and well lit:

Well-illuminated workshop is a must while working. If the room will have less light, it will result in shadows from different directions and will create disturbance in your work. Paint the walls in light colours like white or beige. Ensure overhead lights, focused lights and on-tool lights to ensure safety.

Keeping the workshop clean makes you free to work anywhere and find different equipment easily whenever you need it. A wide range of shop vacs can be used to handle the cleaning process seamlessly. These shop vacs for woodworking workspace can be easily bought online at https://allaboutsaws.com/best-shop-vac/. You can also consider reading user reviews before you buy one for your shop.

Change the blades before they go blunt:

Blunt tools end up tearing the wood fibres and give the piece a fuzzy and uneven look. Professionals always keep notice of their tools. Tools such as scrapers, blades, planes, chisels don’t cut even and fine. Equipment with sharp and fine blades makes the woodworker easy, safe and effective. Using bench grinder or belt sander, start grinding these chapped tools. After grinding, go for honing. It can be done using a flat wet stone or oil stone. For the final touch, polish it using a fine wet stone or leather.

 Make sure to take the measurements using a drafting square:

When you need accurate measurements easily and without any hustle, drafting square is the best option because drywall square is cumbersome. So, drafting square is a way for efficient work. They are quite affordable and easily available. Also, they make fine measurements by marking layouts on board and you are done, fast and easy.

Leave a Reply

Your email address will not be published. Required fields are marked *


This site uses Akismet to reduce spam. Learn how your comment data is processed.