5 Simple yet Effective Ways to Make Your Home Energy Efficient

0
97
5 Simple yet Effective Ways to Make Your Home Energy Efficient

As a homeowner, you know very well how expensive energy costs can be. And you are probably looking for ways of lowering them without being uncomfortable. While it may seem difficult, it is possible and simple to cut down on energy expenditures. The solution lies in making your home energy efficient. Here are the simplest ways that will help save up to 30% on energy costs while conserving the environment.

  1. Prevent Heat Loss Through Doors and Windows

Did you know that your windows and doors actually contribute to heat loss more than you imagined? To prevent this from happening, install dual pane windows that have low-E coatings. The coating keeps hot air out in the summer and prevent hot air from escaping during the winter.

Use low VOC caulk and weather stripping around the windows to add an extra later of insulation. On the doors, you can add door shoe gaskets that are helpful in controlling heat loss. When followed to the latter, these measures will lower your heating and cooling costs.

  1. Install a Smart Thermostat

You can’t underestimate the value of a smart thermostat in energy conservation. A smart thermostat will heat a room when the temperature falls below a comfortable level and stop when it reaches a preferred level. Smart thermostats nowadays have sensors that detect and heat occupied rooms only. This makes heating easier and helps conserve more energy in the process.

  1. Improve Efficiency in Your Lighting

Saving energy costs in your home is all about improving efficiency. And when it comes to saving costs in lighting, this is the case too. Replace the old bulbs with more energy efficient LED lights. Get a professional electrician to install foam gaskets behind switches to prevent energy from leaking. and place the fan on the ceiling or centrally so that less energy is used to cool the home. If possible, install solar panels for lighting and heating water during the day.

  1. Insulate Heating and Cooling Equipment

Insulating your hot water equipment will save you upto 25% in heating costs. This huge saving can be achieved easily. Seal the cooling and heating ducts with duct tape or a mastic sealant to prevent warm air from leaving during winter and cool air from escaping during summer. If the water heater is exposed, invest in a watertight blanket that helps conserve heat. You should also get a programmable thermostat for accurate readings greater control over your heating and cooling equipment.

  1. Make Your Plumbing Efficient

When you make your plumbing efficient, you end up saving 16% in water bills. However, this is not all. Dripping faucets make a room more humid and cold meaning that you will need more energy to heat it up. Install flow shower heads that dispense less water and fix dripping faucets too. You should also check for leaking pipes in the house and basement to ensure there is no moisture build up.

While these are some of the major ways of keeping your home energy efficient, don’t forget to do the simplest things. These include switching off lights and appliances when not in use. When you do this, you will end up saving more than 30% in energy costs altogether.

LEAVE A REPLY

Please enter your comment!
Please enter your name here