Since the old age times, building designs and elegance has been the main priority of rich civilizations. It is already seen that grander the architecture, the wealthier the civilization was. The most classic example of too much wealth is certainly the building up of cornices, beautiful and elegant archways or columns. They are cost effective nowadays as compared to the previous days when only rich and wealthy people could afford sculptors and masons to come up with elegantly built government buildings and private estates. With the advancement of modern technology or plaster moldings, there is more elegantly built structures and cornices. Whether you want to build a classic looking home or wish to restore a Victorian home, you will need plaster and cornice suppliers to offer the supplies. Without the supplies, it will not be possible to install your own cornice. Plaster molding can add a wow factor to the decor of any room.
Steps to Installing Your Own Cornice
To install the cornice, you just have to follow some simple steps. There is a need to arrange cornice and plaster supplies like cornice cement, plaster, and profile mitre box, hand saw, hawk and medium trowel. If the job is larger, you need to use longer setting cement as they offer more working time. Cornice cement comes in different settings like 30 minutes 60 minutes and 120 minutes. Set the ceiling and wall join and sand them prior to starting. To place the plaster profile into place, you can take help from any other person. Follow the steps below:
- In the first step, measure the wall and cut the cornice to adequate length with the help of hand saw and mitre box. Measure down 90mm from the ceiling for the standard 90mm cornice. Mark the measurement.
- Now, mix up the cornice cement till it has the consistency of toothpaste. Only when the consistency is right, it will permit you to press the cornice on the ceiling and the walls. So, if the cornice cement is thick, you will not need any nails to press the cornice.
- Press the cornice into the place with the extra press of hands. The placement must be as per the measurement you made in step one. Press the cornice into place and immediately clean the joints. Since cornice cement is difficult to sand, it is much better to clean the joints when the cement is wet. If there are gaps in between, add cornice cement and remove the extra.
Attain A Grander Effect with Plaster and Cornice
Plaster and cornice suppliers can offer the cornice supplies which tends to be grander and more ornate than coving. Being less uniform, cornice can help attain a grander look. You can choose a complex cornice shape with varied ‘ins and outs’ and feature a variety of patterns to reflect the changing architectural fashion. All throughout the history, there have been various kinds of cornice designs whether it was Victorian age, Georgian or Edwardian era. Even in the homes, contemporary and modern designs are created. Such homes are high on demand in the current times.
Plaster is prepared by mixing cement, sand and other bonding materials. Both plaster and cornice cement must not have very thick consistency. Check out the plumpness and straightness of plaster or the walling material. Mix mortar with water to prepare a paste. You can get in touch with the suppliers and check out the instructions on cornice and plaster usage.